Precision Power Distribution Monitoring
AMC100-FDK Series DC Outgoing Line Monitoring Device(With Switch Status Monitoring)
OVERVIEW
AMC100-FDK Series DC Outgoing Line Monitoring Device(With Switch Status Monitoring) can monitor the full power parameters and switching status(active) of A+B dual DC outlet 48 branches, and 1 RS485 communication.
Acrel AMC100 series AC precision power distribution monitoring device is a measuring device designed specifically for power management of data center servers. The device is compact and can monitor the full electrical parameters, input and output switches and the status of the lightning arrester of A+B two incoming lines and 192 outgoing lines in real time. The alarm thresholds of all measurement channels can be set individually.For the outgoing line ,the limited event triggers the system's sound and light alarms immediately.The whole solution realized the high integration of the monitoring circuits in the volume of the traditional instrument.
MAIN PARAMETERS
|
Instrument model |
AMC100-FDK30 |
AMC100-FDK48 |
|
|
Measuring parameters |
Voltage,Current,Power,Electric energy |
||
|
Bus voltage |
Rated |
48VDC,240VDC,336VDC |
|
|
Measuring range |
±20% |
||
|
Overload |
Instantaneous voltage 2 times per second |
||
|
Current |
Rated |
5V(Hall sensor,need external power supply±12V or±15V) |
|
|
Range |
|||
|
Overload |
Duration is 1.2 times,instantaneous 10 times/second |
||
|
Measuring |
coil out |
Voltage/current level 0.5,power/electric energy level 1 |
|
|
|
Powered by AMC100-ZD;DC 12-24V power supply when used alone |
||
|
Environment |
Temperature |
Operation:-15℃~55℃ Storage:-25℃~70℃ |
|
|
Humidity |
Relative humidity≤93% |
||
|
Altitude |
≤2500m |
||
|
Communication |
RS485/Modbus-RTU |
||
|
Installation |
Method DIN35mm rail or bottom plate installation |
||
|
Protection level |
IP20 |
||
|
Pollution level |
2 |
||
|
Security |
Insulation |
The insulation resistance between all terminals and the conductive parts on |
|
|
Withstand voltage |
Voltage and current signal of line A//Voltage and current signal of line B// |
||
|
Electromagnetic |
Antistatic |
Level 4 |
|
|
Radio frequency |
Level 3 |
||
The difference between AMC100-FDK30/48 and AMC100-FD30/48 is AMC100-FDK30/48 have the function of outlets status monitoring
DIMENSION
AMC100-FDK48/AMC100-FD48 Dimension
AMC100-FDK30/AMC100-FD30 Dimension
MATCHED CURRENT TRANSFORMER
 AKH-0.66-EMS |
|
|
 AKH-0.66-9N-HB AKH-0.66-12N-HB AKH-0.66-20-HB AKH-0.66-30N-HB |
|
APPLICATION SCENARIOS
WIRING DIAGRAM
INSTALLATION INSTRUCTION
PHOTOS ON SITE
①AMC100-FAK30/48 Measure 30/48 channels of each circuit of A+B outgoing line
②AMC100-ZA Measure A+B independent 2 circuits three-phase main incoming line
③RS485 communication line
④AKH-0.66W Type ct or AKH-0.66-EMS type (50,100,200400A)/50mA
⑤AKH-0.66/30I Tpye ct
⑥ATP007kt 7-inch Touch screen or ATP010kt 10-inch Touch screen
